How to Clean RAID Signatures on Linux

By Eric Ma | In Hardware, Linux, Tutorial | Updated on Aug 16, 2015

RAID systems such as MegaRAID add signatures to disks to maintain the infomration on these didks. When we simply remove these disks and install them to another server, Linux on the new server may detect these RAID signature infomration and refuses to continue write to the disk. Here is one example that mkfs reports “apparently in use by the system” and refuses making a filesystem. It is reasonable to do so for the sake of data safety in case someone accidentally moved a disk with useful data.

Shutterstock Free Trial – 10 Free Images. Join Now!ads via Carbon

However, we will need to clean these signatures when we are sure that these disks are not used anymore and we are safe to clean it. The reality is that cleaning the metadata is not that staightforward. In this post, I will discuss common problems and how to fix them to clean the RAID metadata information. The instructions are based on Fedora systems. For other systems, you most likely only need to change the method installing the packages.

Note that the instructions here are dangerous and possibly erase all your data on a disk. Follow these instructions only if you know what you are doing.

Table of Contents

Needed tools

The tools used here are dmraid, dmsetup and dd. Install needed packages.

# yum install mdadm dmraid

Show RAID devices

Show the RAID devices by

# dmraid -r

It will show the results like

/dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 3904294912 sectors, data@ 0

You may find the device at:

# ls /dev/mapper/ddf*

Remove RAID device

Here, there are many methods. I show the most easier one to the most hard one. The example here shows that all except the last dd method failed.

Use dmsetup

Trying directly by dmsetup may fail like:

# dmsetup remove /dev/mapper/ddfs1_...

The result:

device-mapper: remove ioctl on ddf1_49424d202020202010000073101403b141c2c9e96c8236dbp1 failed: Device or resource busy
Command failed

We may try the dmraid tool. Assume the disk is /dev/sdb:

DEVICE=/dev/sdb

Remove RAID status by dmraid:

# dmraid -r -E $DEVICE

In this example, it still failed showing errors as follows.

Do you really want to erase "ddf1" ondisk metadata on /dev/sdb ? [y/n] :y

ERROR: ddf1: seeking device "/dev/sdb" to 1024204253954048ERROR: writing metadata to /dev/sdb, offset 2000398933504 sectors, size 0 bytes returned 0ERROR: erasing ondisk metadata on /dev/sdb

If all failed, you may try the powerful dd:

# dd if=/dev/zero of=$DEVICE bs=512 seek=$(( $(blockdev --getsz $DEVICE) - 1024 )) count=1024
1024+0 records in1024+0 records out524288 bytes (524 kB) copied, 0.00216637 s, 242 MB/s

Check the RAID devices again by

dmraid -r

Now it shows:

no  raid disks

Now the RAID signature on the disk is successfully cleaned. You can do normal operations on the disk as a new disk now.

References:
http://www.server-world.info/en/note?os=CentOS_6&p==raid_metadata
https://kezhong.wordpress.com/2011/06/14/how-to-remove-bios–raid-metadata-from-disk-on-fedora/
http://serverfault.com/questions/488346/removing–raid-metadata-from-drives
http://djlab.com/2013/07/removing–raid-metadata/

Read more

How to migrate Raspberry Pi 5 OS from micro SD to NVME m.2 SSD

首先我買了Raspberry Pi CM5後來買了Raspberry Pi CM5 I/O board來當個人電腦使用,系統是安裝在256GB SD卡上運行的很好。用久了在開啟較肥的程式像Web Browser或LiberOffice會有慢半拍的反應,而有了升級NVME m.2 SSD念頭。 因為Raspberry Pi 5支援的最快PCIe gen3 x 4就不去考慮快的Gen4 or Gen5 m.2 SSD。找了ADATA出的 LEGEND 710入門級的產品,會利用HMB(Host Memory Buffer)來加速I/O速度,因為是Raspberry Pi OS kernel會認不得而無法正常使用 事先在SD卡的/boot/firmware/cmdline.txt 加入 kernel command line參數如下,然後重開機m.

By Phillips Hsieh

How to document Home Lab and Network

運維機房和跨域的網路,會遇到各式需求與問題,用對工具才能分析問題,個人覺得最重要的是使用能處理問題的工具。 推薦目前想學和正在使用的平台與軟體,協助將公司/家用機房文件化 佈告欄任務管理 Focalboard 白板可管理任務指派 網路架構文件編寫 netbox 精細管理網路設備與連接線路 IP 資源管理 phpipam 專注網路IP分配 邏輯塊文件編寫 draw.io 視覺化概念圖 機房設備管理 ITDB 管理設備生命週期與使用者

By Phillips Hsieh

如何在Raspberry Pi4上安裝Proxmox for ARM64

第一步 準備好Raspberry Pi 4 / CM4 4GB RAM,這裡要留意CM4如果是買有內建eMMC storage會限制不能使用SD卡開機而限制本地空間容量,如果沒有NAS外接空間或使用USB開機的話,建議買CM4 Lite插上大容量SD卡 第二步 去Armbian官網下載最小化Debian bookworm image https://www.armbian.com/rpi4b/ Armbian 25.2.2 Bookworm Minimal / IOT 然後寫入SD/USB開機碟,寫入方法參考官方文件 https://github.com/raspberrypi/usbboot/blob/master/Readme.md Note: 官方提供的預先設定系統方法,可以在Armbian初次啟動自動化完成系統設定。連結在此 https://docs.armbian.com/User-Guide_Autoconfig/

By Phillips Hsieh

世界越快心越慢

在晚飯後的休息時間,我特別享受在客廳瀏灠youtube上各樣各式創作者的影音作品。很大不同於傳統媒體,節目多是針對大多數族群喜好挑選的,在youtube上我會依心情看無腦的動畫、一些旅拍記錄、新聞時事談論。 尤其在看了大量的Youtube的分享後,我真的感受到會限制我的是我的無知,特別是那些我想都沒想過的實際應用,在學習後大大幫助到我的生活和工作層面。 休息在家時,我喜歡想一些沒做過的菜,動手去設計生活和工作上的解決方案,自己是真的很難閒著沒事做。 如創作文章,陪養新的習慣都能感覺到成長的喜悅,是不同於吃喝玩樂的快樂的。 創作不去限制固定的形式,文字是創作、影像聲音也是創作,記錄生活也是創作,我想留下的就是創造—》實現—》回憶,這樣子的循環過程,在留下的足跡面看到自己一路上的成長、失敗、絕望、重新再來。 雖然大部份的時候去做這些創作也不明白有什麼特別的意義,但不去做也不會留下什麼,所以呀不如反事都去試試看,也許能有不一樣的水花也許有意想不到的結果,投資自己永遠不會是失敗的決定,不是嗎?先問問自己再開始計畫下一步,未來沒人說得準。 像最近看youtube仍大一群人在為DOS開

By Phillips Hsieh