Inside the Dell PC Restore Partition Windows 7 - Manual Restore from Dell Factory Image

Windows 7 – Manual Restore from Dell Factory Image 

Try this method if the automated Factory Restore procedure does not work. If the factory-installed Dell Backup and Recovery Manager is missing or damaged, it may be possible to manually restore the factory image using Microsoft's ImageX utility. The procedure that follows assumes you have a copy of imagex.exe and you still have a Dell Recovery partition with a factory image on it. The factory image is located at c:\Dell\Image\factory.wim. 

Restoring the Factory Image will erase any user-installed programs and user data. Before proceeding, make sure you backup any user data you want to save (documents, pictures, music, etc.) and make sure you have the installation media to reinstall user programs. 

(Note: Click on any image below to view a larger image. Click your browser's 'Back' button to return to this page.) 

Screen 1: 

Before starting, copy the imagex.exe file to a USB flash drive and insert the flash drive into a USB port on the computer. 

Turn the computer on and follow the first four steps here until you get to the System Recovery Options screen. 
 

Screen 2: 

This is the main System Recovery Options menu. 

We will use the "Command Prompt" option to perform the factory image restore. However, to avoid accidentally overwriting the wrong partition, it is very important to make sure you know which drive letters the Recovery Environment has assigned to the Recovery partition, the OS partition, and the flash drive. The next few steps are to identify those drive letters. 

To check the drive letters, select the "System Image Recovery" option. 

(Note: this option is for restoring images made with Microsoft Backup, so it won't find the Dell factory image. However, this is the only menu option that lets us explore the drive letter assignments.) 
 

Screen 3: 

As anticipated, a Microsoft system image is not found. 

Click [Cancel] to close the alert window and continue. 
 

Screen 4: 

Click [Next] to proceed to the next window. 
 

Screen 5: 

Click the [Advanced..] button. 
 

Screen 6: 

Click "Install a driver" to continue. 

(Note: we are not going to install a driver, but the other two options, "Search.." and "Cancel", will not let us continue.) 
 

Screen 7: 

Click the [OK] button to continue. 
 

Screen 8: 

In the left pane of the "Open" dialog box, click "Computer". 

The right pane will show the drives and the drive letters that have been assigned by the booted Recovery Environment. (Note: your computer may show different drive labels or sizes than shown in this example.) 

On a Dell-configured hard disk, the main Windows-7 OS partition should be identified as drive D: with the label "OS", and the Recovery partition should be identified as drive C: with the label "RECOVERY". If you have readjusted the partition layout, you may have different labels or drive letters. 

Also note the drive letter of your flash drive. (In this example it is the G: drive.) 

You may double-click any drive letter icon to study the files and folders in each partition. Explore the RECOVERY partition to make sure it actually has a factory image on it. The factory image will be named factory.wim and will be in the /Dell/Image folder of the RECOVERY partition. 

(Note: you must have a factory.wim image file. If you don't, there is no point continuing as you have nothing from which to restore.) 

Once you are satisfied that you know the drive letters of the Recovery partition and the OS partition we are going to overwrite, press "Cancel" until you return to the System Recovery Options menu (screen 2). 
 

Screen 9: 

From the System Recovery Options menu, select the "Command Prompt" option. The following instructions assume the flash drive (as determined in screen 8) is drive G:, the Recovery partition is drive C:, the Windows-7 OS partition to be overwritten is D:. 

At the command prompt, type the following command:

  g:\imagex  /apply  c:\dell\image\factory.wim  1  d:\  

When you press the [Enter] key, the ImageX utility will begin overwriting the D: partition with the contents of the factory.wim image. 

(Tip: these drive letter assignments apply only in the Recovery Environment. When the OS partition is later booted it will reassign the drive letters and the OS partition will become C:.) 
 

Complete the process of restoring the factory image. The process will reformat the OS partition and restore it to the state it was in when shipped from the factory. 

Reboot and the computer should boot into Windows 7. 

Use windows Update to install any Windows updates that were released after the factory ship date. 

Reinstall any user-installed programs, and restore backed up user data.

Read more

How to migrate Raspberry Pi 5 OS from micro SD to NVME m.2 SSD

首先我買了Raspberry Pi CM5後來買了Raspberry Pi CM5 I/O board來當個人電腦使用,系統是安裝在256GB SD卡上運行的很好。用久了在開啟較肥的程式像Web Browser或LiberOffice會有慢半拍的反應,而有了升級NVME m.2 SSD念頭。 因為Raspberry Pi 5支援的最快PCIe gen3 x 4就不去考慮快的Gen4 or Gen5 m.2 SSD。找了ADATA出的 LEGEND 710入門級的產品,會利用HMB(Host Memory Buffer)來加速I/O速度,因為是Raspberry Pi OS kernel會認不得而無法正常使用 事先在SD卡的/boot/firmware/cmdline.txt 加入 kernel command line參數如下,然後重開機m.

By Phillips Hsieh

How to document Home Lab and Network

運維機房和跨域的網路,會遇到各式需求與問題,用對工具才能分析問題,個人覺得最重要的是使用能處理問題的工具。 推薦目前想學和正在使用的平台與軟體,協助將公司/家用機房文件化 佈告欄任務管理 Focalboard 白板可管理任務指派 網路架構文件編寫 netbox 精細管理網路設備與連接線路 IP 資源管理 phpipam 專注網路IP分配 邏輯塊文件編寫 draw.io 視覺化概念圖 機房設備管理 ITDB 管理設備生命週期與使用者

By Phillips Hsieh

如何在Raspberry Pi4上安裝Proxmox for ARM64

第一步 準備好Raspberry Pi 4 / CM4 4GB RAM,這裡要留意CM4如果是買有內建eMMC storage會限制不能使用SD卡開機而限制本地空間容量,如果沒有NAS外接空間或使用USB開機的話,建議買CM4 Lite插上大容量SD卡 第二步 去Armbian官網下載最小化Debian bookworm image https://www.armbian.com/rpi4b/ Armbian 25.2.2 Bookworm Minimal / IOT 然後寫入SD/USB開機碟,寫入方法參考官方文件 https://github.com/raspberrypi/usbboot/blob/master/Readme.md Note: 官方提供的預先設定系統方法,可以在Armbian初次啟動自動化完成系統設定。連結在此 https://docs.armbian.com/User-Guide_Autoconfig/

By Phillips Hsieh

世界越快心越慢

在晚飯後的休息時間,我特別享受在客廳瀏灠youtube上各樣各式創作者的影音作品。很大不同於傳統媒體,節目多是針對大多數族群喜好挑選的,在youtube上我會依心情看無腦的動畫、一些旅拍記錄、新聞時事談論。 尤其在看了大量的Youtube的分享後,我真的感受到會限制我的是我的無知,特別是那些我想都沒想過的實際應用,在學習後大大幫助到我的生活和工作層面。 休息在家時,我喜歡想一些沒做過的菜,動手去設計生活和工作上的解決方案,自己是真的很難閒著沒事做。 如創作文章,陪養新的習慣都能感覺到成長的喜悅,是不同於吃喝玩樂的快樂的。 創作不去限制固定的形式,文字是創作、影像聲音也是創作,記錄生活也是創作,我想留下的就是創造—》實現—》回憶,這樣子的循環過程,在留下的足跡面看到自己一路上的成長、失敗、絕望、重新再來。 雖然大部份的時候去做這些創作也不明白有什麼特別的意義,但不去做也不會留下什麼,所以呀不如反事都去試試看,也許能有不一樣的水花也許有意想不到的結果,投資自己永遠不會是失敗的決定,不是嗎?先問問自己再開始計畫下一步,未來沒人說得準。 像最近看youtube仍大一群人在為DOS開

By Phillips Hsieh