首先到VMWare網站去下載VMware vCenter Server Appliance的檔案 這邊進行安裝的是「VMware vCenter Server 5.5.0 Update 1c Appliance」這個版本 使用vSphere Client連線到ESXi主機後，點選「檔案 –> 部署OVF範本」 點選瀏覽按鈕，找到OVF這個檔案 這邊會讓你知道這個vCenter Server Appliance的相關資料 這邊我選擇精簡佈建，如果實際環境硬碟夠大的話，建議可以選擇預設值 安裝佈署中 佈署完成 完成後可以在vSphere Client中看到此VM Appliance 在該VM點選滑鼠右鍵，選擇「編輯設定」 可以發現這邊預設的記憶體要8G，我這邊資源沒那麼多，所以先設定4G (不建議用低於4G的記憶體來跑vCenter Serve
configuration
22, Dec 2016 17:13 Source link http://yzl1218.tian.yam.com/posts/193153129 目前這個功能只能下PowerShell啟用，不能透過HyperV管理員進行設定 Set-VMProcessor -VMName HV -ExposeVirtualizationExtensions $true 執行指令前 執行指令 執行後就可以在Guest VM中安裝HyperV囉！
Network
First, user Domain Administrator login local computer Run Local Security Policy located as below point. Control Panel –> Administrative Tools –> Local Security Policy Local Policy –> User Rights Assignment –> "Allow Logon Locally" Add your local or domain user group/accounts there.
backup
NetBackup has three type: 1. Synthetic – done without network transfer and make a whole new image 2. Optimnised Synthetic – done without network transfer and synthesises and new image but adding de-dupe pointers only 3. NetBackup Accellerator – small amount of data transfer from the client and synthesises a full backup
backup
APPLIES FOR NETBACKUP VERSION : 3.X 4.X 5.X 6.X AND 7.X Any site using Netbackup should use time to configure and adjust the BPTM buffers. It does improve performance – a LOT. Just to show what a difference the buffer settings really do for a LTO3 drive:
backup
Contents 11 Configuring NDMP 11.1 Configuration Process 11.2 Enabling NDMP of the VTL6000 11.3 Configuring NDMP Services on the NDMP Host 11.4 Installing the NetBackup for NDMP component 11.5 Configuring NDMP Host in NetBackup 11.6 Configuring NDMP Storage in NetBackup 11.7 Creating a
backup
Problem Steps to remove NetBackup Media Server Deduplication Pool (MSDP) configuration from a NetBackup environment Solution Warning: These steps will expire all images associated with the MSDP that is to be removed! Note: For NetBackup version 7.0.1, the script in step 13 is only available with the latest
backup
SVN 基本指令教學 NFS mount for svn that need add nolock option 172.22.13.97:/nas/NAS-00066/fds/Share on /mnt/nfs type nfs (rw,nolock,addr=172.22.13.97) 發表於 2007 年 07 月 10 日 由 Tsung SVN 的基本指令介紹, 主要參考自下述: * SubTrain – Open Source Trainings for Subversion:
backup
http://wiki.bacula.org/doku.php?id=bacula_manual This manual is currently being updated by Baylink (et al) to conform to v5.0. Contributions are encouraged, particularly those by people who know the new version well, and can confirm or correct CHECKME and spots. (Please Contribute: Pick a topic,
Hardware
Refer the http://172.22.16.150/wordpress/?p=702 to create a USB key. Then edit file isolinux/isolinux.cfg and copy drm_files to NFS server at nfs://172.22.21.1:/home/ftp/upload/R910. default network-nfs prompt 1 timeout 100 display message.txt label 1
Dell
This article provides information about making an USB device bootable and integrating an update-image (ISO-file). For servers without an optical drive (DVD) or a configured integrated Dell Remote Access Controller (iDRAC) this is an alternative way of updating all server firmwares in one single step. To create a
http://en.community.dell.com/support-forums/servers/f/956/t/19527121 I solved it . It supports only Zx8 memories . Finally, I use 4 8GB low voltage 1.35V DDR3 DIMM. I didn't know it is type as x8 that do try and work.