Remove Dell FSR720 OEM brand method

Reference Link

******************* “”Cust”” ( Customer ) exe ******************* 
1) Ensure Identity Module’s exe file does not have “”BSU”” ( Board Service Util) in its file name.
2) Extract .pm from the zip pack exe.
3) Login to iDRAC web GUI , navigate to ‘Update and Rollback’ link on left pane.
4) Using ‘Firmware Update’ tab, browse to the “”Cust”” .pm file and upload it.
5) Under the ‘Update Details’ section, select your .pm file. Ensure ‘Current’ and ‘Available’ revisions are as expected.
6) Click ‘Install’ button.
7) Go to ‘Job Queue’ tab and wait for your install job to change from ‘New’ to ‘Completed’.
8) Navigate to ‘Troubleshooting’ link on left pane. Click on ‘Diagnostic’ tab on right. Click on ‘iDRAC rest to Default Settings’ link. Note: This step will set V4 DHCP to Std Dell’s default value of disabled.
Wait for iDRAC reboot to complete ( about 4 minutes ).Enable V4 DHCP (assuming that was current setting).
11) Reboot the system.Wait for System to complete followed by one more self-reboot before you see updated BIOS splash logo.
12) Verify that the tab –>’System Inventory’ –> ‘Firmware Inventory’ shows ‘Identity Module’ as a component with new revision.
13) Verify the Branding changes ( on iDrac GUI and System) are working.
14) Restore ( if any ) iDRAC user settings that were noted during ‘Preparation’ above.

******************* ‘Identity Module DUP’ ( aka PM DUP). *******************