Dell R710 applied FalconStor BIOS update with Dell released BIOS
Force flash Dell R710 xxx /forcetype bios firmware http://2big4twitter.wordpress.com/2012/12/05/unable-to-apply-bios-update-to-dell-poweredge-2950-iii/
Force flash Dell R710 xxx /forcetype bios firmware http://2big4twitter.wordpress.com/2012/12/05/unable-to-apply-bios-update-to-dell-poweredge-2950-iii/
file system
It is in /run/user/<uid>/gvfs instead of /run/user/<username/login>/gvfs. Please note that: <uid> is user id = number while <username/login> is a string, human readable user name Where one to the other is mapped through /etc/passwd
configuration
During transient loss of connection, instead of reporting "Device not available" immediately, the Microsoft iSCSI initiator will try to reconnect to the target and resubmit outstanding SCSI commands. There are three registry values related MS iSCSI retry behavior, found in the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
The Dell Online Store Please Take a Moment to Review SYSTEM OPTIONS PowerEdge R730 PowerEdge R730 Server, No TPM Chassis Configuration Chassis with up to 8, 3.5" Hard Drives Processor Intel® Xeon® E5-2623 v3 3.0GHz,10M Cache,8.00GT/s QPI,Turbo,HT,4C/8T (105W) Max
configuration
By 洋蔥爸比 Tosian Yang 之前我們講到用 snmpd 裡面的 proc + 服務名稱來監視特定的服務狀態,但這只對部分的服務有效,例如 ntpd, snmpd, nfsd, httpd…等等,我不太確定他的抓取方式,但似乎,用 ps 去看如果 process name 沒出現在最前面的,似乎 snmpd 就 monitor 不到,這種狀況像 Tomcat 就會出現。舉例來說,我有個服務是用到 java 去帶起來的,如下面所示: [root@KHXAAAS1 ~]# ps -aef|grep AAA|grep -v AAA root 19475 1 0
configuration
List of required hotfixes for Windows Server Specific Windows Server hotfixes are required before you install or upgrade the Data ONTAP DSM. The hotfixes listed in this section are the minimum requirement. The following tables specify the name and version of the file that is included in each required hotfix
configuration
I’ve been meaning to write a post about recovering / reinstalling SRM 4.1 after having to rebuild one when a client suffered a host failure but never got the chance to until this weekend. The incident happened during a planned datacenter move a few weeks ago where the environment
Server
VMware Appliance default usernames and passwords published by Rob Bastiaansen on Thu, 11/14/2013 – 19:11 VMware offers many appliances for their products. Unfortunately they are not all created equally. The installation and configuration procedures differ for most appliances and also the default usernames and passwords are different throughout
configuration
由 nepgb 在 三, 01/15/2014 – 10:35 發表 01. 在網上找尋一下,您會知道需要安裝一個叫xrdp的套件。 sudo apt-get install xrdp 02. 在Ubuntu的電腦中,打開左上角的圖示『Search your computer and online sources』,尋找『desktop』,選擇『Desktop Sharing』。 03. 啟動『Sharing』選項。 04. 返回Windows 7中,選擇『開始』、『所有程式』、『附屬應用程式』、『遠端桌面連線』。 05. 輸入Ubuntu的IP地址,後面需加上埠位數值『:3389』。 06. 會出現『無法驗證遠端電腦』
database
https://docs.oracle.com/cd/B28359_01/server.111/b28310/diag001.htm#ADMIN11257 Alert Log The alert log is an XML file that is a chronological log of database messages and errors. It is stored in the ADR and includes messages about the following: * Critical errors (incidents) * Administrative operations, such
configuration
by Eric Jenkinson on April 8, 2010 Categories: Backup and Recovery Tagged: archive log, redo log Note: It is recommended to perform a backup of the database (after a shutdown normal or immediate) prior to changing the archive status of a database. If you would like to perform these tasks
file system
First, follow up the page link http://wiki.centos.org/HowTos/BuildingKernelModules to understand basically kernel source make knowledge. Example Commands. #cd ~/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.i686 #cp /boot/config-2.6.32-504.16.2.el6.i686 .config #cp /usr/src/kernel/`uname -r`/Makefile . #make menuconfig